SH-EX1200のカットラグを極限まで減らし、あえてTPUというゴムライクの素材で作ることで当たった時のカタッと音が軽減されます。
3Dプリント出力物です。
素材:TPU
取り付け方
前、後、底パネルを留めているネジをプラスドライバーで外し、パネルを外します。
クロスフェーダーを固定しているネジを外し、クロスフェーダーが基盤と繋がっているコネクタの接続も外します。
クロスフェーダーを外した所に取り付け位置が出てきますのでCut Lug Spacer for SHEX1200をはめ込んでください。
元に戻して完成です。

By reducing the cut lag of SH-EX1200 to the limit and making it with a rubber-like material called TPU, the sound when hit is reduced.
It is 3D printed output.
In the case of PLA material, it may deform even at temperatures around 50 - 60 degrees.
If you are planning to use it in places where you will be treble, please purchase the ABS material that you plan to add later.
Material: PLA
Lamination pitch: 0.06 mm
Nozzle diameter: 0.4 mm